Pin-Up Color, Pure White 009

€2.84 Save €2.00
€4.84
Quantity

Semi-permanent UV color gel, 9 ml

 

Secure payments

 

Fast delivery

 

Professional Products Made in EU

Ideal color for application on gel, acrylic, "reinforced" semi-permanent builder.

Very elastic and resistant, a color that with a generous application allows you to reduce working times.

Brush with soft bristles for easy application without defects.

Removal with our Burlesque Easy Remover by applying a moistened pad on the nails for 10'.

Cure in 30".

Classic semi-permanent use method :

1 preparation with our preparers No-Myco , Dry Prep , Power or Soft P rimer . Power Primer with acids for "difficult and greasy" nails, Soft Primer without acids for all nail types. Between the various preparers, air dry each one.

2 apply a gel base coat:

- Soft Base gel for normal and / or problem-free nails

- Strong Base gel for thin and damaged nails

- Power Base gel (with methacrylic acid) for "difficult or oily" nails

For difficult and thin or damaged nail types, we recommend the application of the Power Base gel (cure 30") and then the Strong Base gel (cure 30"). If there are cases of intolerance or allergies to methacrylic acid, replace the Power Base gel with the Soft Base gel (polymerize 30").

3 Apply a layer of PIN-UP Color (cure 30"). Repeat this step (optional).

4 Finish with the application of the top gel:

- Glamor Tacky Top with dispersion (cure 30", wait 60" without touching the gel, eliminate dispersion with Burlesque Shine Cleaner)

- Glamor No-Wipe Top without dispersion (cure 60", wait 60" without touching the gel)

- Glamor Matt Top matt effect (cure 60", wait 60" without touching the gel)

For removal use our Burlesque Easy Remover, applying a moistened cotton pad on the nails, for 10'and remove with the help of a suitable tool.

Note: The colors may differ according to the type of screen from which they are displayed.

We recommend that you use all our products, in the sequence indicated above, for the best result.

The lamp to use can be our UV-LED lamp or any of its kind. It is recommended that it be 48 watts minimum.

For classic UV lamps, the times are to be considered doubled.

PUC009

Specific References