Acrylic Powder VINTAGE COLORS

Vintage because ...

The use of acrylic as a material for nail extension began by chance at the hands of a dentist, Fred Slack. In 1957 </ strong>, while working in his workshop, he injured a fingernail. He took a piece of aluminum and repaired the nail with dental acrylic compound. He made the first ever artificial nail in the world. Thus acrylic began to be used for strengthening and extending nails.

How to use : Acrylic, unlike gel, is not a ready-made product but must be created directly on the brush. The brush is dipped into the VINTAGE MONOMER liquid (monomer) and then the brush tip is dipped into the VINTAGE acrylic powder (polymer). You get a "ball" of compound that must not be too wet or too dry, otherwise the reconstruction will hold.

The difficulty in acrylic nail reconstruction lies in applying the right combination and quantity of monomer and polymer. If this step is not done correctly, 2 types of mixture can be created: Dry : the mixture will be grainy and difficult to work with. In this case the reconstruction will be not very flexible and very fragile to impacts. Liquid : it could compromise the adhesion of the product to the natural nail causing lifting. To create a more than perfect mixture, a ratio of polymer to monomer of 1.5 part of liquid and 1 part of powder should be made. All this can be learned with a lot of practice and a lot of practice.

STEP BY STEP APPLICATION:

- Carefully disinfect both the hands of the Onicotecnica and those of the customer with Sept .

- Gently push back the cuticles and remove them if necessary.

- Shorten the nails giving them the shape desired by the client.

- Mattify with our Buffer Half Moon and degrease the client's nails with the Burlesque cleaner;

1st STEP No-Myco

2nd STEP Dry Prep

3 ° STEP Soft Primer for normal nails without non-specific problems, or Power Primer with methacrylic acid for oily or problematic nails.

Air dry each product for 30 "between steps.

- Apply the acrylic powder VINTAGE by taking it with the special brush wet with monomer liquid VINTAGE . Powder and liquid will make up a ball that will be spread on the nail.

- Model the acrylic ball before it dries in the air (generally it takes about 3 minutes). It takes three balls per nail. One to be applied on the free edge, a slightly larger one in the central area of ​​the nail (zone 2) so that the crown or apex is automatically created, a smaller one near the root.

- File the resulting reconstruction and shape the perfect shape with HALF MOON files .

Thanks to its color, it can be used on its own without necessarily having to proceed with a color.

- Color ... Choose your favorite PIN-UP color and spread out. Polymerize 30 ". Repeat color application (optional).

- Finish with the application of the top gel.

* Glamor Tacky Top with dispersion (cure 30 ", wait 60" without touching the gel, remove dispersion with Burlesque Shine Cleaner )

* Glamor No-Wipe Top without dispersion (cure 60 ", wait 60" without touching the gel)

* Glamor Matt Top matt effect (cure 60 ", wait 60" without touching the gel)

Please Note : We recommend that you use all of our products, in the sequence indicated above, for the best result.

REMOVAL OF ACRYLIC

Acrylic is a very hard product that produces little fine dust but is more difficult to remove. It can be removed with a COARSE file or with the nail cutter. One of its peculiarities that distinguishes it from the Gel is that it can be completely dissolved by immersing the nail for at least 25 minutes in BURLESQUE REMOVER . This feature makes it particularly suitable for reconstructions on sensitive nails to which it would be better to avoid prolonged and annoying filings.